RAM TRX 2022, Руководство по функциям, Страница: 70 / 96

68 IN CASE OF EMERGENCY
Jack Warning Label
1. Remove the spare tire, jack, and tools from
the stored location.
2. Using the lug wrench, loosen the wheel nuts
(do not remove), by turning them counter -
clockwise one turn while the wheel is still on
the ground.
3. Assemble the jack and jacking tools. Connect
the jack handle driver to the extension, then to
the lug wrench.
Assembled Jack And Tools
4. Placement for the front and rear jacking
locations are critical. See the following images
for proper jacking locations.

Apply the parking brake firmly and set the
transmission in PARK.

Block the wheel diagonally opposite the wheel
to be raised.

Never start or run the engine with the vehicle
on a jack.

Do not let anyone sit in the vehicle when it is
on a jack.

Do not get under the vehicle when it is on a
jack. If you need to get under a raised vehicle,
take it to a service center where it can be
raised on a lift.

Only use the jack in the positions indicated
and for lifting this vehicle during a tire change.

If working on or near a roadway, be extremely
careful of motor traffic.

To assure that spare tires, flat or inflated, are
securely stowed, spares must be stowed with
the valve stem facing the ground.
WARNING!
CAUTION!
Do not attempt to raise the vehicle by jacking on
locations other than those indicated in the
Jacking Instructions for this vehicle.
22_DT_TRX_SU_EN_USC_t.book Page 68