RAM Ram 1500 2012, Руководство пользователя

Страница: 80 / 156

• The RamBox
®
storage bins can be locked using the vehicle key.
NOTE: Provisions are provided in the bins for cargo dividers and shelf supports.
These accessories (in addition to other RamBox
®
accessories) are available from
MOPAR
®
.
RamBox
®
Storage Bin Cover Emergency Release Lever
• As a security measure, a Storage Bin Cover Emergency Release is built into
the storage bin cover latching mechanism.
NOTE: In the event of an individual being locked inside the storage bin, the
storage bin cover can be opened from inside of the bin by pulling on the
glow-in-the-dark lever attached to the storage bin cover latching mechanism.
Bed Extender
• The bed extender has three functional positions:
• Storage Position
• Divider Position
• Extender Position
Storage Position
• The storage position for the bed extender is at the front of the truck bed.
• To install the bed extender into the storage position, perform the following:
• Make sure the center handle is unlocked using the vehicle key and rotate the
center handle vertically to release the extender side gates.
• With the side gates open, position the extender fully forward in the bed
against the front panel.
• Rotate the side gates closed allowing the outboard ends to be positioned in
front of the cargo tie-down loops.
• Rotate the center handle horizontally to secure the side gates in the closed
position.
• Lock the center handle using the vehicle key to secure the panel into place
and assist against theft.
Divider Position
• There are 11 divider slots along the bed inner panels which allow for various
positions to assist in managing your cargo.
• To install the bed extender into a divider position perform the following:
• Make sure the center handle is unlocked using the vehicle key and rotate the
center handle vertically to release the extender side gates.
• With the side gates open, position the extender so the outboard ends align
with the intended slots in the sides of the bed.
• Rotate the side gates closed so that the outboard ends are secured into the
intended slots of the bed.
UTILITY
78