RAM® QUICK DRAW™ ASSEMBLY INSTRUCTIONS (SIDE B)
RMR-INS-QDJRBS
RAM Mounting Systems
8410 Dallas Ave S
Seattle, WA 98108
Phone: (206) 763-8361
Fax: (206) 763-9615
www.rammount.com
[email protected]
AVOID SHARP BENDS
ATTACHING WIRE CLIP
REMOVE SCREW ABOVE USB PORT, SNAP POWER CORD IN WIRE CLIP, AND RE-INSERT SCREW TO SECURE POWER CORD THROUGH WIRE CLIP.
WARNING: THIS PRODUCT IS DESIGNED TO BE MOUNTED WITH A GENUINE RAM® MOUNT. IT IS THE RESPONSIBILITY OF THE
INSTALLER/END USER TO ENSURE THIS PRODUCT IS PROPERLY MOUNTED AND SECURED, AS TO AVOID FREE MOVEMENT ABOUT THE
CAB OF THE VEHICLE OR SIMILAR INSTALLATION ENVIRONMENT. PLEASE USE ALL CABLE RETENTION FEATURES SUPPLIED WITH THIS
PRODUCT, AND USE BEST PRACTICES IN WIRE ROUTING TO AVOID DAMAGE TO THE MOUNT OR MOUNTED DEVICE. NOT FOLLOWING
THESE INSTRUCTIONS MAY VOID YOUR WARRANTY.
DOCKING INSTRUCTIONS
1.
PLACE TOP END OF DEVICE INTO (C)
TOP CUP. ENGAGE SPRING TENSION
BY APPLYING UPWARD FORCE.
2.
ONCE UPWARD FORCE IS APPLIED, THERE SHOULD BE
AMPLE ROOM TO FIT ENTIRE DEVICE INTO DOCKING STATION
WITHOUT MAKING CONTACT WITH (B) DOCKING CUP. ALIGN
BOTTOM OF DEVICE WITH GROOVES IN (B) DOCKING CUP.
3.
ONCE ALIGNED, ALLOW SPRING
TENSION TO ENGAGE YOUR DEVICE
WITH DOCKING CONNECTOR PINS
ON (B) DOCKING CUP.
1
2
3
RAM® QUICK DRAW™ ASSEMBLY INSTRUCTIONS (SIDE B)
RMR-INS-QDJRBS
RAM Mounting Systems
8410 Dallas Ave S
Seattle, WA 98108
Phone: (206) 763-8361
Fax: (206) 763-9615
www.rammount.com
[email protected]
AVOID SHARP BENDS
ATTACHING WIRE CLIP
REMOVE SCREW ABOVE USB PORT, SNAP POWER CORD IN WIRE CLIP, AND RE-INSERT SCREW TO SECURE POWER CORD THROUGH WIRE CLIP.
WARNING: THIS PRODUCT IS DESIGNED TO BE MOUNTED WITH A GENUINE RAM® MOUNT. IT IS THE RESPONSIBILITY OF THE
INSTALLER/END USER TO ENSURE THIS PRODUCT IS PROPERLY MOUNTED AND SECURED, AS TO AVOID FREE MOVEMENT ABOUT THE
CAB OF THE VEHICLE OR SIMILAR INSTALLATION ENVIRONMENT. PLEASE USE ALL CABLE RETENTION FEATURES SUPPLIED WITH THIS
PRODUCT, AND USE BEST PRACTICES IN WIRE ROUTING TO AVOID DAMAGE TO THE MOUNT OR MOUNTED DEVICE. NOT FOLLOWING
THESE INSTRUCTIONS MAY VOID YOUR WARRANTY.
DOCKING INSTRUCTIONS
1.
PLACE TOP END OF DEVICE INTO (C)
TOP CUP. ENGAGE SPRING TENSION
BY APPLYING UPWARD FORCE.
2.
ONCE UPWARD FORCE IS APPLIED, THERE SHOULD BE
AMPLE ROOM TO FIT ENTIRE DEVICE INTO DOCKING STATION
WITHOUT MAKING CONTACT WITH (B) DOCKING CUP. ALIGN
BOTTOM OF DEVICE WITH GROOVES IN (B) DOCKING CUP.
3.
ONCE ALIGNED, ALLOW SPRING
TENSION TO ENGAGE YOUR DEVICE
WITH DOCKING CONNECTOR PINS
ON (B) DOCKING CUP.
1
2
3
