RAM DACOTA 2011, Руководство пользователя

Страница: 36 / 76

REAR CRATE 'N GO
®
STORAGE
• The rear Crate 'n Go® storage,
located under the rear seat lower
cushion, consists of two removable,
collapsible storage crates.
• To open the crates, lift upward on
the crate handles and engage the
crate end flaps.
• To remove the crate, press on the
release lever, located on the ends of
the base, and lift up on the crate.
• To install the crate into the base,
insert the crate into the inboard slot
and push down on the outboard side
of the crate, then snap into place.
• To collapse the crate, push the crate
end flaps inward to disengage. Push
the sides inward and snap into place.
REAR CARGO AREA
UTILITY RAILS
• There are four adjustable cleats in
the pick-up bed that can be used to
assist in securing cargo. Each cleat
must be located and tightened down
in one of the detents along either
rail, in order to keep cargo properly
secured.
TAILGATE
Tailgate Removal
• To simplify mounting a camper unit
with an overhang, the tailgate can
be removed quickly. Follow these
steps:
• Open the tailgate to a 45-degree
angle.
• Unclip and remove the cables
from the box while maintaining a
45-degree angle.
• Lift the tailgate off of the pivot on
the passenger side by pulling
upward and rearward at the same
time.
• Slide the tailgate to the passenger
side while making sure clearance
from the box and taillight is
maintained.
• To reinstall the tailgate, do the
following:
• Slide the tailgate onto the driver's
side pivot.
• Hold the tailgate at a 45 degree
angle and insert it into the
passenger side pivot.
• Clip the cables to the box.
UTILITY
34