RAM CHASSIS CAB 3500 2017, Руководство пользователя

Страница: 107 / 276

Clock Setting
1. Push the Menu button at the bottom of the radio, and push the Enter/Browse
button for System Settings. Next, select the Time and Format setting and then
select Set Time by pushing the Enter/Browse button.
2. Adjust the hours or minutes by turning the Tune/Scroll knob, then pushing the
Enter/Browse button to move to the next entry. You can also select 12hr or 24hr
format by turning the Tune/Scroll knob, then pushing the Enter/Browse button on
the desired selection.
3. Once the time is set, press the “Ok” button to exit the time screen.
Audio Setting
• Push the AUDIO button on the radio faceplate.
• The Audio Menu shows the following options for you to customize your audio
settings.
Treble, Mid, Bass, Fade, Balance, Speed Adjusted Volume, Loudness and AUX Offset
• Select the desired setting to adjust, then push the ENTER/BROWSE button. Turn
the TUNE/SCROLL knob to adjust the s or - . Push the “Back” button when
done.
Radio Operation
Seek Up/Down Buttons
• Push the up or down button to seek through radio stations in AM, FM or SXM
bands.
• Hold either button to bypass stations without stopping.
Store Radio Presets Manually
The presets are available for all Radio Modes, and are activated by pushing any of the
six preset buttons. The Radio stores up to 18 presets in each of the Radio modes.
Push the A-B-C button on the faceplate to select the A, B, or C preset list.
To store a radio preset manually, follow the steps below:
1. Tune to the desired station.
2. Push and hold the desired numbered button for more than two seconds, or until
you hear a confirmation beep.
E L E C T R O N I C S
105