Technical Specifications
Datos Técnicos
Technische Daten
©2018 by C.E. Studio-2 s.l. - Pol.Ind. La Figuera - C/Rosa Luxemburgo nº34 - 46970 Alaquas - Valencia - SPAIN
Phone:+34 96 127 30 54 Fax:+34 96 127 30 56 - http://ramaudio.com - e-mail: [email protected]
RAM
Audio
®
, ICL™, PMS™ and PowerPack™ are registered trademarks of C.E. Studio-2 s.l. All other names are trademarks of their respective companies.
DSP Specifications
Output Power Configuration
AS 2K3
AS 1K5
(Selectable by channel)
CH-A
CH-B
CH-A
CH-B
8 ohm
1500W
400W
400W
400W
4 ohm
1500W
750W
750W
750W
2 ohm
750W
750W
750W
750W
Bridge 8 ohm
-
1500W
Bridge 4 ohm
-
1500W
Total Harmonic Distortion
<0.05%
<0.05%
Efficiency
>90%
>90%
Damping Factor
(20-500Hz @8Ω)
>400
>400
Voltage Gain
32dB
32dB
Operational Mains voltage
85-265V AC/50-60Hz
85-265V AC/50-60Hz
Consum. @4Ω, 1/8 r.p., 230V AC
1.7 A
1.2 A
Power Factor
>0.95
>0.95
Efficiency
>90%
>90%
Dimensions
External Plate WxH
130x443 mm
130x443 mm
Internal Enclosure WxHxD
100x423x55 mm
100x423x55 mm
Occupied Volume (optional case)
2 l
2 l
Weight
1.5 kg
1.5 kg
Connections:
XLR Input, XLR Link, powerCON True1 in-out, USB, 2x RJ45, barrier strip (in optional case)
Protections:
Turn-on transients, Over-heating, DC, RF, Short-circuit, mismatched loads, ICL™, PMS™
Overall:
• High performance 96kHz 120dB 32 bits AD/DA converters
• 64 bit double-precision 96kHz DSP process
• 0.6ms minimum process latency time
• Up to 3000 taps custom FIR process
• Up to 562ms total audio delay
Input Section:
• Gain, Mute and Phase inversion
• Input Delay: 0 to 140 meters (406ms)
• Input EQ: 31 GEQ + 8 PEQ (Parametric, Shelving, LP, HP, BP,
SB, AP)
Output Section:
• Crossover Filters: FIR and IIR (up to 48dB/oct, Butterworth /
Linkwitz-Riley / Bessel)
• Output Delay: 0 to 18 meters (52ms) per channel
• Output IIR EQ: 12 filters per channel (Parametric, Shelving,
LP, HP, BP, SB, AP)
• Output FIR EQ: 20 filters per channel (Parametric, Shelving,
LP, HP, BP, SB, AP), or Custom up to 3000 taps
• RMS, Peak, and Thermal limiter per channel
Amplifier Specifications
Control & Monitor:
• Standby mode for remote turn-on
• Real time impedance monitor
• Stby., Signal, Lim, Clip, Temp and Prot monitor
• Input, Output, Temperature and Current meters
Communications:
• Two ports Ethernet switch for daisy chain
connection
• USB 2.0, Type B connector
Overall:
• 20 Manufacturer preset memories library
• 5 User preset memories library
• 4 Quick Preset selection
• Manufacturer/Installer/User passwords
• Independent selectable output power per
channel (Z dependant)
• User control groups for virtual Equalization,
Gain and Delay
• Zone management for library, stand-by and
alerts information
• Smaart
®
analysis software integration
RAM_OCS Control
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point inside
an equilateral triangle indica-
tes the existence of internal
components whose substitu-
tion may affect safety.
The lightning and
arrowhead symbol
warns about the
presence of uninsulated
dangerous voltage.
To avoid fire or electrocution risk do not expose
the unit to rain or moisture. To avoid electric
shock, do not open the unit. No user serviciable
parts inside. In the case of disfunction, have the
unit checked by qualified agents. Class I device.
