Attach the Doors
1. Orient the doors so the interior of
the door is facing the interior of
the car.
2. Insert the post on the bottom of
the door into the hole on the side
of the car body.
3. The hinge should fit into the hinge
inset. Align the holes on the hinge
with the hinge inset.
4. Insert a screw into each hole on
the door hinge and tighten.
There will be a total of four
screws.
Attach the Dashboard
1. Attach the wire connectors coming
from the dashboard body (located
in the dashboard inset) to the
wire connectors coming from the
bottom of the dashboard.
2. Insert the three tabs on the front of
the dashboard into the three slots
on front of the dashboard inset.
3. Align the holes on each side of the
dashboard with the holes on the
sides of the dashboard inset.
4. Insert a screw into each hole and
tighten. There will be a total of
two screws.
It’s easiest to perform the next
steps when the doors are open.
Tip!
9
1
2
3
4
1
2
2
2
3
3
4
4
