STARTING AND OPERATING
239
3. Attach the trailer to the vehicle without the
weight distribution bars connected.
4. Measure the height of the top of the front
wheel opening on the fender to ground, this
is height H2.
5. Install and adjust the tension in the weight
distributing bars per the manufacturers’
recommendations so that the height of the
front fender is approximately (H2-H1)/
2+H1 (about 1/2 the difference between
H2 and H1 above normal ride height [H1]).
6. Perform a visual inspection of the trailer
and weight distributing hitch to confirm
manufacturer’s recommendations have
been met.
NOTE:
For all towing conditions, we recommend towing
with TOW/HAUL mode engaged.
Towing With All Other 2500/3500 (Non-Air
Suspension)
1. Position the truck to be ready to connect to
the trailer (do not connect the trailer).
2. Measure the height of the top of the front
wheel opening on the fender to ground, this
is height H1.
3. Attach the trailer to the vehicle without the
weight distribution bars connected.
4. Measure the height of the top of the front
wheel opening on the fender to ground, this
is height H2.
5. Install and adjust the tension in the weight
distributing bars per the manufacturer’s
recommendations so that the height of the
front fender is approximately (H2-H1)/
2+H1 (about 1/2 the difference between
H2 and H1 above normal ride height [H1]).
6. Perform a visual inspection of the trailer
and weight distributing hitch to confirm
manufacturer’s recommendations have
been met.
NOTE:
For all towing conditions, we recommend towing
with TOW/HAUL mode engaged.
Fifth-Wheel Hitch
The fifth-wheel hitch is a special high platform
with a coupling that mounts over the rear axle of
the tow vehicle in the truck bed. It connects a
vehicle and fifth-wheel trailer with a coupling
king pin.
Your truck may be equipped with a fifth wheel
hitch option. Refer to the separately provided
fifth wheel hitch safety, care, assembly, and
operating instructions.
Measurement
Example
Example 2500/3500
Height (mm)
H1
1030
H2
1058
H2-H1
28
(H2-H1)/2
14
(H2-H1)/2 + H1
1044
Measurement
Example
Example 2500/3500
Height (mm)
H1
1030
H2
1058
H2-H1
28
(H2-H1)/2
14
(H2-H1)/2 + H1
1044
4
21_DJD2_OM_EN_USC_t.book Page 239