RAM 2012 5500 Chassis Cab, Руководство пользователя

Страница: 14 / 108

• Loosen the child seat adjusters on
the lower straps and on the tether
strap so that you can more easily
attach the hooks or connectors to
the vehicle anchors.
• Attach the lower hooks or
connectors over the top of the
seatcover material.
• Then tighten the straps as you push
the child restraint rearward and
downward into the seat.
Installing The Top Tether Strap (With Either Lower Anchors Or Vehicle Seat Belt) -
Regular Cab - Front Seat:
• Place the child restraint on the seat and adjust the tether strap so that it will
reach over the seat back under the head restraint to the tether anchor directly
behind the seat.
• Lift the cover (if so equipped), and
attach the hook to the square
opening in the sheet metal.
• Install the child restraint and remove
the slack in the tether strap
according to the manufacturer's
instructions.
Installing The Top Tether Strap (With Either Lower Anchors Or Vehicle Seat Belt) -
Crew Cab - Rear Seats:
• Obtain tether straps by raising the head restraints and reaching between the
rear glass and rear seat. The tether strap may be retained with an elastic band.
Accessibility to the tether strap is greatly improved by raising the seat cushion
to the “up” position. Remove the elastic before use.
• Place a child restraint on each outboard rear seat and adjust the tether strap
so that it will reach under the head restraint to the tether anchor directly
behind the seat and then to the anchor directly behind the center rear seat.
• Pass each tether strap hook under the head restraint and through the loop of
webbing behind the child seat.
• Route each tether strap to the anchor behind the center seat, and attach the
anchor loops.
• Place a child restraint on the center rear seat and adjust the tether strap so
that it will reach under the head restraint to the tether anchor directly behind
the seat and to the anchor directly behind the right seat.
GETTING STARTED
12