Ram Trucks 1500, Руководство пользователя

Страница: 66 / 364

NOTE:
Your vehicle is equipped with two key fobs, one key fob can be linked to memory
position 1 and the other key fob can be linked to memory position 2.
The memory seat buttons are located on the outboard side of the driver’s seat
cushion.
Programming The Memory Feature
To create a new memory profile, perform
the following:
1. Cycle the vehicle’s ignition to the ON/
RUN position (do not start the en-
gine).
2. Adjust all memory profile settings to
desired preferences (seat, side mir-
rors, adjustable pedals and radio sta-
tion presets).
3. Push and release the S (set) button on
the memory switch.
4. Within five seconds, push and release
either of the memory buttons (1) or
(2). The instrument cluster display will show which memory position has been set.
NOTE:
• Memory profiles can be set without the vehicle in PARK, but the vehicle must be
in PARK to recall a memory profile.
• To set a memory profile to your key fob, refer to “Linking And Unlinking The
Remote Keyless Entry Key Fob To Memory” in this section.
Linking And Unlinking The Remote Keyless Entry Key Fob To Memory
Your key fobs can be programmed to recall one of two pre-programmed memory
profiles by pushing the unlock button on the key fob.
NOTE:
Before programming your key fobs to memory the feature has to be selected.
• If your vehicle is equipped with a touchscreen, you must select the “Memory To
Fob” feature through the Uconnect system. Refer to “Uconnect Settings” in
“Understanding
Your Instrument Panel” in the Owner’s Manual on
www.ramtrucks.com/en/owners/manuals for further information.
• If your vehicle is not equipped with a touchscreen, you must select the “Key Fob
Linked To Memory” feature through the instrument cluster display. Refer to
“Instrument Cluster Display” in “Understanding Your Instrument Panel” in the
Owner’s
Manual on www.ramtrucks.com/en/owners/manuals for further
information.
Memory Seat Button Location
G E T T I N G S T A R T E D
64