3. SETTING & OPERATION
a.
b.
c.
d.
e.
a.
b.
c.
d.
→
→
2
Turn the handle in the counter-clock direction until the click
sound to open the chuck.
Do not work in a dangerous place. Do not use the product in humid
places
The chuck is opened and the bit is removed.
Turn the handle in clock direction until the end and the chuck
is closed and the bit is locked.
CAUTION
Transport and storage conditions :
Temperature : -20 ~ 60°C
Connect Handpiece Cord to the jack marked as "MOTOR" (DC
Motor Connector)in the front of the controller.
Turn the Speed Control Knob to start the handpiece. Turn it
until click sound to power off and to stop the handpiece.
Turn the Forward/Reverse Selector to "FWD" to run the
motor in the forward direction, or to "REV" to run it in the
Reverse direction.
Handpiece Motor speed can be varied between 0 and
30,000 rpm by the Speed Control Knob.
(3) Insertion and Removal of Bits
The battery could overheat in this case
While operating the handpiece, the battery can be charged
connecting the power cord.
(2) Operating of Handpiece
( Lamp color : Red —> Green )
Humidity: 0 ~ 90° RH
(1) Charging the Battery (Approx. 5 hours to Full Charge)
Connect the adaptor DC plug in Power Connector on the side
of the controller.
Connect the AC power adaptor to outlet (wall socket).
When the lamp changes red to green, the charge is
completed.
Disconnect AC Adaptor from Controller after charging is
completed.
