1
CONTROLLER
Set-Up
1. The controller has automatic detection for heat or temperature utilizes thermal sensors it will shut
down the unit preventing operation and possible damages. The display window will flash as an alert.
Turn off the main power switch (#5) and check for possible causes.
2. ALWAYS make sure that the proper input voltage is correct according to the label specifications.
3. In the event the unit does not operate, check all connections for the power cord at (#1) and the
wall outlet, handpiece connection at (#11), and the foot pedal connection at (#3).
In the unlikely event of overheating, the unit will resume its operation after cooling.
•Turn off the main power switch when not in use to avoid power and electric current to the controller.
•Always check the handpiece carefully for smooth operation prior to each use.
•Do not use with any other brands of equipment as brushless units are not compatible with other brands.
Items to Check If Operation Has Failed
Safety Tips!
Standard
Place in a convenient location avoiding any moisture or chemicals.
All components should be connected prior to turning on the main power switch (#5).
Make sure the power cord is securely attached in the rear (#1).
BP50 controller utilizes a state of the art microprocessor chip for programming of speed control,
overload and safety and much more. This includes a memory feature to remember the last user
settings before the main power is turned off.
Power Outlet:
Main power cord receptacle. This also contains a safety fuse drawer and if there is
no power, you can use the fuse. This is the main power switch to prepare the unit.
1
Power Fuse:
Shows the fuse location and is conveniently located to access if needed
(5x20mm – 2amp fuse).
2
Speed Pedal Interface:
Variable speed foot control connects here.
3
Operation Indicator:
LED speed display and error alerts.
4
Main Power Switch:
Turns the unit on and off.
5
Knob Speed Indicator:
Indicates operation in the hand mode has been selected, therefore the
speed is controlled by the speed dial (#10).
6
Motor:
When the main power switch is on, the controller waits attention and is ready for use in
standby mode. Touch the motor button to start the operation.
7
Reverse Light:
Indicates operation in reverse direction has been selected.
8
Forward Light:
Indicates operation in forward direction has been selected.
9
Speed Control Knob:
Used to adjust or vary the desired speed. In hand mode, the speed totally
controls the handpiece speed. While using in foot pedal mode, the speed dial setting can also
limit the top or maximum speed for greater control and safety.
10
Handpiece Socket:
Connects the handpiece on the plug.
11
Foot Speed Indicator:
Indicates operation by the foot pedal has been selected.
12
Motor Button:
Engages the handpiece for operation and use or can disengage for stopping or
taking a rest from operation while remaining ready.
13
Control Mode Button:
To operate by the speed dial and hand control or with the foot pedal and
speed dial as set.
14
Forward/Reverse Button:
Controls handpiece direction to forward or reverse.
15
Model Input Output MaxAmp Rotate Speed Power L W H Wt.
BP50
AC110V
50HZ-60HZ
AC220V -50HZ DC0-36V
0.35A
1000-50,000
50W
170mm 160mm 80mm
1.561kg
2
