RAM Commercial RAM PROMASTER, Краткое руководство пользователя, Страница: 8 / 16

• If the function has been activated (On), push
the up or down arrow buttons to select the
desired speed limit and then push MODE to
confirm.
NOTE:
Setting is possible between 20 and 120 MPH
(30 and 195 km/h), according to the previously
set unit. The setting will increase/decrease by
five units each time the
up or down arrow button
is pushed. Hold down either up or down arrow
button to automatically increase/decrease the
setting rapidly. Complete the adjustment with
single pushes of the button when you approach the
desired value.
• Push the MODE button briefly to return to the
menu screen or hold the button down to return
to the standard screen without storing.
To cancel the setting, proceed as follows:
• Briefly push the MODE button, (On) will flash
on the display
• Push the down arrow button, (Off) will flash
on the display
• Push the MODE button briefly to return to the
menu screen or hold the button down to return
to the standard screen without storing.
For further information, and applicable warnings
and cautions, please refer to the Owner’s Manual at
www.mopar.com/en-us/care/owners-manual.html
(U.S. Residents) or www.owners.mopar.ca (Cana-
dian Residents).
Interior Bulb Replacement
For proper interior bulb replacement procedures,
refer to “Bulb Replacement” in "In Case Of
Emergency” located in the Owner’s Manual at
www.mopar.com/en-us/care/owners-manual.html
(U.S. Residents) or www.owners.mopar.ca (Cana-
dian Residents).
I N C A S E O F E M E R G E N C Y