Instrument Cluster Display Controls
• Push the
up
arrow button to scroll upward
through the main menus (Speed Beep,
Buzzer Volume, Exit Menu) and
submenus.
• Push the
down
arrow button to scroll
downward through the main menus and
submenus.
• Push the
MODE
button for access to main
menus, submenus or to select a personal
setting in the setup menu.
• Push and hold the
MODE
button for two
seconds to reset displayed/selected
features that can be reset.
INSTRUMENT CLUSTER
DIMMING
With the headlights on, and without entering
into the menu, push the
up
or
down
arrow
button to increase or decrease the brightness
of the instrument panel, graphics, and
command buttons.
NOTE:
The instrument cluster display dimmer
switch can only be used to adjust the bright
-
ness when the headlights are turned on.
SPEED BEEP
This function makes it possible to set the
vehicle speed limit (mph or km/h). When this
limit is exceeded the driver is immediately
alerted.
To set the desired speed limit, proceed as
follows:
• Briefly press the
MODE
button: the display
will show the wording (Speed Beep)
• Push button to select speed limit activa
-
tion (On) or deactivation (Off)
• If the function has been activated (On),
push the
up
or
down
arrow buttons to
select the desired speed limit and then
push
MODE
to confirm.
NOTE:
Setting is possible between 20 and 120 mph
(30 and 195 km/h), according to the previously
set unit. The setting will increase/decrease by
5 units each time the
up
or
down
arrow button
is pushed. Hold down either
up
or
down
arrow
button to automatically increase/decrease the
setting rapidly. Complete the adjustment with
single push of the button when you approach
the desired value.
• Push the
MODE
button briefly to return to the
menu screen or hold the button down to return
to the standard screen without storing.
To cancel the setting, proceed as follows:
• Briefly push the
MODE
button, (On) will
flash on the display
• Push the
down
arrow button, (Off) will
flash on the display
• Push the
MODE
button briefly to return to
the menu screen or hold the button down
to return to the standard screen without
storing.
20_VF_QRG_EN_US_t.book Page 4