38
figure 1
figure 2
FENDERS
Front Fender
The front fender is mounted at the fork crown. There are two ways in which to mount your front fender.
The first is the caliper brake mounting system (see figure 1), and the second is the 10mm nut and
bolt system (see figure 2). Identify the mounting system used on your bicycle and follow the given
instructions for that particular type of mounting system.
1. Caliper Brake Mounting System
First remove the front wheel from your bicycle. Remove the hex nut from the caliper brake bolt on the
rear of the fork, and slide the brake assembly from the fork. Place the fender assembly onto the fork
making sure the attachment holes and fender bracket holes line up. Reattach the caliper brake making
sure that the brake arms are on each side of the fender. Tighten the bolt until secure.
2. 10mm Nut and Bolt Mounting System
First remove the front wheel from your bicycle. Place the fender assembly onto the fork making sure the
attachment holes and fender bracket holes line up. Attach the fender with the 10mm hex bolt and nut.
Tighten the bolt until secure.
