Ralcam F6B Series, Руководство пользователя, Страница: 21 / 24

BORESCOPE
19 EN
Possiblecauses Fault Method
TROUBLESHOOTING
Unable to
Power-on
1.Dead Battery
2.Incorrect
Installation
1.Please recharge or replace the
battery.
2.Please check the battery and
battery compartment contact if it
is dirt or deformation then reinstall
the battery
Auto Power
-of f
Low Battery
Please recharge or replace
the battery.
Boot screen
stuck
1.Failed to start the
system.
2.Low Battery.
1.Reassemble the battery and
restart it,then charge it.
2.Reinstall the host
Image cannot
be recorded
or found
SD card capacity is
insuf
fi cient.
1.Replace the SD card or delete
unnecessary fi les.
2.Formatting the SD Card.
"SD card error
" or "Format"
when inserting
The position of the
card is deviated. 1.Clean the SD card contact.
2.Reinstall the SD card.
Can't charge
1.The charging
interface is dirty.
2.Damaged charging
cable.
1.Clean the charging interface
and replug it.
2.Replace the charging cable
or charger
Blurry Imag
1.The probe is dirty.
2.Probe is not within
the range of the
depth-of- fi eld.
3.Damaged lens due
to high temperature.
1.Clean the probe with the lint-free
cloth within the package.
2.Please place the probe within the
depth of fi eld range of 20-100mm.
3.Do not place the probe in a high
temperature environment
(below 70°C).
The probe
steering
range is too
small
Snake tube is
distorted
Please place the snake tube straight