TrackerBoard User Manual
COPYRIGHT ©
SHENZHEN RAKWIRELESS TECHNOLOGY CO., LTD
ETDX1711291302
3. Firmware Download
RAK811 BreakBoard open source hardware supports three ways to download the
firmware. First of all, it can support CoIDE to download program firmware using SWD
interface.Secondly, support Keil5 use SWD interface to download program firmware.
Finally, also support serial port BOOT burning firmware.
3.1 Use CoIDE
Use CoIDE to download the program, need to use J-link, through the J-link connected
to the device's SWD interface for online debugging.
The SWD interface of RAK811 TrackerBoard is shown below:
After connecting the SWD interface, open CoIDE project, click compile, debug to
download debugger, See below:
