●
Modules should be mounted vertically, with the terminals at the bottom.
●
Ensure that cable clamps are securely fitted on the supply and load cables.
●
While the modules are designed to be completely maintenance-free, they should be
mounted in an accessible location should investigation or re-addressing of the units
be necessary.
STEP 1:
Remove the cover by
removing the two screws at
the bottom of the unit,
pulling the bottom of the
cover away from the
bottom, and lifting it up.
STEP 2:
Insert the supply IN
conductors as well as the
load OUT conductors.
STEP 3:
Fit the supplied cable
clamps and ensure the
cable is unable to move.
STEP 4:
Replace the cover and
replace the screws.
RMT1200 Manual Version 2.0.0
