16
Three sets of lines shall be embedded in host equipment (reserved line is 10cm long)
(1)
The 12V power supply cable RVV2x1.0 standard and above, one end at the host equipment, the
other end to the 220V or 22-well outlet at the top of the shift door, install the 12V2A factory 12V
adapter, the adapter 220V power cable directly plugged into the 220V power 2-well socket.
(2)
Door opening control line RVV2x0.5 standard and above, one end at the host equipment, and the
other end to the original access control special power supply or door removal entry control
controller, to connect their door signal interface during installation.
(3)
Super five types of network wire 8x0.5 anaerobic copper standard and above, one end at the host
equipment, the other end to the weak power room switch connected to the Internet. In special
circumstances, if the wired network is difficult, the wireless network at the door is also very stable,
so wireless can be considered.
7.1.2
Description of the size and hole position of the wall hanging bracket
Fixed the wall hanging board and the main machine can use a hexagon screw M 3 * 6 in the machine
tooth cup head (package), note that the thread head is not short circuit.
Note: If the installation environment is a glass plate or a smooth stone wall surface inconvenient
to open holes, you need to attach the back glue and exit the line from the bottom;
