RAK WisBlock RAK12004, Быстрый старт

Страница: 1 / 18

Documentation Center
RAK12004 Quick Start Guide
Prerequisite
What Do You Need?
Before going through each and every step on using RAK12004 WisBlock MQ2 module, make sure to prepare the
necessary items listed below:
Hardware
RAK12004 WisBlock MQ2 Gas Sensor Module
Your choice of WisBlock Base with IO slot
Your choice of WisBlock Core
USB Cable
Li-Ion/LiPo battery (required)
Solar charger (optional)
Software
Download and install Arduino IDE .
To add the RAKwireless Core boards on your Arduino project, install the RAKwireless Arduino BSP. Follow the
steps in the
RAKwireless Arduino BSP .
Product Configuration
Hardware Setup
RAK12004 module is part of the WisBlock Sensor category and extends the WisBlock system with a gas sensor
alert system. The RAK12004 connects to the WisBlock Base Board through the IO slot. The Figure 1 shows the
assembly of a
WisBlock Core highlighted in green and the module RAK12004 highlighted in red. Also, always
secure the connection of the WisBlock module by using the compatible screws. For more information about
RAK12004, refer to the
Datasheet .
Figure 1: RAK12004 connection to WisBlock Base Board