RAK RAK12005 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 8

RAK RAK12005 Скачать руководство пользователя страница 1

Documentation Center

RAK12005 Quick Start Guide

Prerequisite

What Do You Need?

Before going through each and every step on using the RAK12005 WisBlock module, make sure to prepare the
necessary items listed below:

Hardware

RAK12005 & RAK12030 WisBlock Rain Sensor Module

with IO slot

USB Cable

RAK19008 WisBlock IO Extension Cable (optional)
Li-Ion/LiPo battery (optional)
Solar charger (optional)

Software

Arduino

You need to download and install

To add the RAKwireless Core boards on your Arduino Boards Manager, install the

RAKwireless Arduino BSP

.

Product Configuration

Hardware Setup

The RAK12005 is an electroconductive-liquid detect module used for detecting water and other electroconductive
liquids. WisBlock can integrate this module, which makes it easy to build up a data acquisition system to help
protect your assets from rain or fog damage.

For more information about RAK12005, refer to the

The RAK12005 module gives information about:

Rain/Water Detect - measures resistance changes caused by water or condensed fog.

1
2
3
...
»

Содержание RAK12005









Отзывы:

Нет отзывов