E.2 Choose the Correct Soft Plug
Only one soft plug is used when building the connector. Measure the diameter of your Ethernet cable and
choose the one that is correct for that diameter. This is important for getting a sealed connection.
• Red plug is for cable 7.0 - 8.1 mm diameter.
• Black plug is for cable 5.0 - 6.0 mm diameter
Figure: Red or Black WAPV Soft Plug Choice
E.3 Pre-thread Before Termination
Three WAPV parts (cap, soft plug, inner shell) must be pre-threaded onto the not-yet-terminated end of
the Ethernet cable. In this example, the red soft plug is used because this Ethernet cable’s diameter is 7
mm. Note that one end of the soft plug is wider. The wider end of the soft plug faces the cap. The narrow-
er end faces the inner shell.
Figure: WAPV Pre-thread Before Termination
(1)
Cap
(2)
Appropriate soft plug for cable diameter
(3)
Inner shell
(4)
Unterminated end of Ethernet cable
(5)
Metal-shielded male RJ45 plug (plastic latching tab visible on top)
(6)
Outer shell with soft circular washer placed inside (see note below)
Tip
Tip
If you look/feel inside the outer shell you will see that one end has larger rectangular keys (blocky
If you look/feel inside the outer shell you will see that one end has larger rectangular keys (blocky
bumps) on the inside. The larger keys are the ones that will mate with the female WAPV connector on
bumps) on the inside. The larger keys are the ones that will mate with the female WAPV connector on
the ES1 enclosure. The smaller keys inside the other end of the outer shell are the ones that will mate
the ES1 enclosure. The smaller keys inside the other end of the outer shell are the ones that will mate
with the inner shell. The end wih smaller keys (which is shown closest in the photo above) will also re-
with the inner shell. The end wih smaller keys (which is shown closest in the photo above) will also re-
ceive the soft circular washer which will rest on a narrow shelf that circles the inside of the outer shell.
ceive the soft circular washer which will rest on a narrow shelf that circles the inside of the outer shell.
Содержание BreadCrumb ES1
