2
WARNING!
Only use this instrument within recommended limits of its chemical resistance.
Never use GlassMaster with fuming liquids which are incompatible with
polypropylene or silicone.
Never use with highly flammable liquids.
Observe the reagent manufacturer’s safety information.
Never use GlassMaster in an atmosphere where there is an explosion. danger.
When not in use store on bench stand.
Never use force when in use.
If the instrument fails to work to specification stop pipetting. Check instructions
headed Trouble Shooting (page 4).
Only recharge with manufacturer’s original charger.
All repairs must be carried out by an authorized dealer.
Use only the manufacturer’s accessories and spare parts. See page 5.
Recharging GlassMaster
Before starting to operate carefully check mains voltage and recharge batteries.
To charge GlassMaster
1. Recharging tempe10°C to +35°C
2. Plug the charger jack (6) into the base of GlassMaster.
3. Plug the charger (5) into a suitable wall socket. The indicator on the charger
will light up.
4. Place GlassMaster onto bench stand
5. Allow unit to charge for 14 hours from empty to fully charged.
6. When GlassMaster is fully charged, the charger automatically switches to a
trickle charge operation and the indicator will turn off. If the charge to
GlassMaster is interrupted and then re - started, the charger starts its full
14 hour charging cycle again. This will not damage the battery.
Only use the charger indoors and protect against moisture.
9920-226 Rev B 8/24/00 4:44 PM Page 3
