Rainford RBH-4634 BF, Руководство пользователя

Страница: 17 / 72

17
 After the authorized staff completes the settings, he should readjust seal rings and
markings all over the appliance and replace the labels including information relating
to the used gas with the labels including information relating to the new adjusted gas.
 After completing injector replacement, place the fire bars and burners and make sure
of fitting them properly.
WARNING: The gas conversion must be performed by qualified service personnel.
Gas Type
and Pressure
Burner Type Injector
LPG (BUTANE)
G 30
30 mbar
Big Wok
Small Wok
Rapid
Semi Rapid
A uxiliary
0,95
0,85
0,85
0,65
0,50
NG (NATURAL)
G 20
20 mbar
Big Wok
Small Wok
Rapid
Semi Rapid
A uxiliary
1,35
1,15
1,15
0,97
0,72
Table 1
ELECTRICAL CONNECTION
All electrical connections should be made only by licensed electric technician in accordance
with the applicable law and regulations. Connections must be in accordance with national
regulations.
Electrıc Connectıon Device Before

Which is positioned on the front bottom of the main power is supplied from the mains
power will meet the specified record label sure.

Grounded plug is mounted to oven energy supply cord.This must used with grounding-
line.Please make a qualified electirical grounding installation.

Connection of the product to the mains power can be made only by authorized and
licensed person and the product’s warranty commence only after right installation.
WARNING: This appliance must be earthed.
Power supply cable in;
Yellow / green, the grounding cable must be connected to the terminal.
Blue neutral wire connected to the terminal marked with the’’N’’.
Black, brown or red electrical cables installed must be connected to edge indicated by the’’L’’
.
(See Figure 7)