raindrip.com/weathersmart
Installation & Programming
7
Items Required for Installation
Included in Package:
• Docking Station
- #8 X 1
1
⁄
4
" screws (4)
- Drywall anchors (4)
• Mounting Bracket for weather station (WeatherSmartPRO
™
)
- #6 X 1" screws (2)
Tools and Other Items (not included):
• Phillips head screwdriver
• Wire strippers
• Power drill (if drywall anchors are used)
• 1/4" drill bit (if drywall anchors are used)
• 2 AA alkaline batteries for timer
• 2 AA alkaline batteries for weather station (WeatherSmartPRO
™
)
Installation Requirements
raindrip.com/weathersmart
8
Docking Station Installation
For new installations
• Locate near sprinkler wires from
irrigation system valve solenoids.
• Locate within 48" of a 110 volt AC outlet.
Mount the docking station
• Undock and set the timer aside.
• At the selected location, hold
the docking station on the wall.
• Using the docking station as a template,
mark the four screw locations on the wall.
• If drywall anchors are needed, drill a 1/4"
hole in the wall at each marked location.
• Insert a drywall anchor in each hole so that
it is flush with the wall surface.
• Position the docking station over the anchors.
• Insert and tighten one #8 X 1
1
⁄
4
" screw in
each of the four holes. Do not overtighten screws.
NOTE: Must be installed
in a weather resistant
enclosure if mounted
outdoors.
Installation: Docking Station
Installation & Programming
