3
If the sound remains poor on the suspect loudspeaker after swapping location and the distortion
moves with the loudspeaker to the new location, the loudspeaker may be the problem. If the
distortion remains in the original location then the problem is elsewhere in your audio/video system.
•
You must have proof of purchase to receive warranty service. Please keep your original sales receipt
and be prepared to provide this receipt in the event you require service.
Contents and Detail of Parts
2 pieces
3-way loudspeaker
2 pieces
bracket
2 pieces
thumb screw
4 pieces
screw and screw anchor
1 piece
installation manual
Technical Data
System
SPA-365 WP
Peak power handling
60 Watt
Power rating
30 Watt
Sensitivity
89 dB 1W/1m
Frequency response
60 – 20.000 Hz
Impedance
4
Ω
Woofer
165 mm Polypropylene
Midrange
25 mm Polypropylene
Tweeter
20 mm Piezo Dome
Dimensions (H x W x D)
281 x 204 x 204 mm
Weight
2,50 kg
Positioning the Loudspeakers
Mounting both loudspeakers on a common solid surface facing the listening area will provide the best
audio results.
Do NOT mount the loudspeakers on surfaces that have hazards such as electrical wires or plumbing
behind them. Be sure that your mounting surface is capable of supporting the weight of the
loudspeakers.
Mounting brackets are included for wall and ceiling applications. The loudspeakers have two standard
6.3 x 20 (¼”-20) brass inserts incorporated into the rear of the enclosure for aftermarket mounting
systems.
We recommend that you take the time to experiment with the different speaker placements. Sound
quality and imaging are widely dependent on the location of your loudspeakers as well as room
acoustics. Angling each loudspeaker toward the listening position often provides the most realistic
imaging experience. The amount of perceived bass increases as you move a loudspeaker closer to solid
intersecting room surfaces (wall, ceiling, floor).