4.
Fill in the other details if you want but these are not necessary. The overspeed limit can however
be useful if you suspect that the driver of the vehicle transporting the tracker holder is a careless
or reckless driver.
5.
Save the information you have entered and go back to ‘Settings’. Click on ‘Device Setting’
followed by clicking on the ‘Set Command’ box. You will be presented with the following screen
display:
You can now make changes to any of the parameters in the box:
6.
Upload interval
: By default the device will automatically record and upload its location every 10
minutes. To maximise battery life, the GPS chip inside will ‘sleep’ in between those 10 minute
intervals, waking for 30 seconds to obtain and upload a position, before going back to sleep.
