Rainbow Communications Arris DTA, Руководство по самостоятельной установке

Страница: 2 / 10

Installing Your Rainbow HD
Digital Transport Adapter (DTA)
Your kit contains the following items needed for
connecting your DTA to your TV*:
DTA Box Coax Cable Power Adapter
Remote Control
*For customers connecting to a Digital TV, you will not need to use the
provided white coax cable. For customers connecting to a Non-Digital
TV, you will not need to use the provided black HDMI cable.
Batteries HDMI Cable
To cable
wall outlet
To electrical
outlet
STEP 3
STEP 1
STEP 2
To TV “HDMI” port
+5V CC In
1.2 A MAX
POWER
CH 3/4
To TV Cable In W
ar
ranty V
OID
if br
ok
en or r
emo
ved
TV ON
STEP 4
A Connecting to a Digital TV
1. Currently you have a coax cord that runs from your wall outlet to your TV.
Unscrew the coax cord from your TV and connect it to the “Cable In” port
on the back of the DTA.
2. Connect the provided black HDMI cord from the “HDMI” port on the back of
the DTA to the “HDMI” port on your TV.
3. Connect the provided black DTA power adapter from the Power input on the
back right of the DTA box to the electrical outlet on a wall closest to your
TV.
4. Turn on your TV with your existing TV remote and tune it to the HDMI input.
5. See page 5 and 6 for instructions on pairing and programming your DTA
remote.
If you purchased your TV less than 10 years ago and have an HDMI
port on your TV that connects to the provided HDMI cable, follow
these instructions. If your TV does not have an HDMI port, skip this
page and refer to, “Connecting to a Non-Digital TV”.
3 2 4 5 6
TV ON
STEP 5
To cable
wall outlet
To electrical
outlet
STEP 4
STEP 1
STEP 2
To TV “Cable In” port
+5V CC In
1.2 A MAX
POWER
CH 3/4
To TV Cable In W
ar
ranty V
OID
if br
ok
en or r
emo
ved
STEP 3
Set to
channel 3
If you purchased your TV more than 10 years ago and have only a
coax connection on your TV, follow these instructions. If your TV has
an HDMI port, refer back to page 3, “Connecting to a Digital TV”.
B Connecting to a Non-Digital TV
1. Currently you have a coax cord that runs from your wall outlet to your TV.
Unscrew the coax cord from your TV and connect it to the “Cable In” port on
the back of the DTA.
2. Connect the provided white coax cord from the “To TV” port on the back of
the DTA to the “Cable In”, “RF In”, or “ANT” connection on your TV.
3. On the back of the DTA, make sure the switch is over to number 3.
4. Connect the provided black DTA power adapter from the Power input on the
back right of the DTA box to the electrical outlet on a wall closest to your TV.
5. Turn on your TV with your existing TV remote and turn it to channel 3.
6. See page 5 and 6 for instructions on pairing and programming your DTA
remote.
NOTE:
The below message is normal.
This screen appears when the
channels are loading.
NOTE:
The below message is normal.
This screen appears when the
channels are loading.
!
The DTA should begin loading channels
within 10 minutes. If channels aren’t
loaded in 60 minutes, call Technical
Support at: 877-708-4382 .
Self-Install Video Tutorial: www.rainbowtel.net/DTA
!
The DTA should begin loading channels
within 10 minutes. If channels aren’t
loaded in 60 minutes, call Technical
Support at: 877-708-4382 .
Self-Install Video Tutorial: www.rainbowtel.net/DTA
Pairing your Rainbow DTA
remote control
Programming your DTA remote to your TV
Once your remote control is paired to your DTA, you can program your DTA
remote to your TV. Programming your DTA remote will allow you to turn your
TV on and off, switch the channel as well as change the volume.
1. Point remote at TV. (Make sure TV is on).
2. Press and hold “SETUP” until the LED at the top of the remote blinks twice.
3. Press and hold “OK/ENTER” key.
4. Release “OK/ENTER” key when TV turns off.
Programming your Rainbow DTA
remote control
TV ON
<
4
step
3
step
2
step step
Pairing your DTA remote to your DTA box
Once your DTA is plugged in and your TV and DTA are powered on, you can
pair your DTA remote to your DTA box. Pairing the DTA remote to the DTA
box will allow you to use all functions of the DTA box, such as the “GUIDE”
and “MENU”.
Your DTA remote will work with your DTA right out of the box. However,
there are times when pairing a DTA remote to the DTA is necessary. For
example, if you would like to put your DTA behind your TV (out of line of
sight of the remote), you will need to pair the remote to the DTA.
Customers also need to pair the remote to the DTA if they have several TVs
that are close together to eliminate changing the channel on the wrong TV.
1. Put provided AA batteries in the remote.
2. Point remote at DTA.
3. Press and hold “SETUP” until the LED at the top of the
remote blinks twice and then press “MENU”
4. LED will blink continuously until paired.
5. Follow the instructions on the screen to complete pairing.
<
If you have questions or need help, please
call Rainbow Technical Support:
Self-Install Video Tutorial: www.rainbowtel.net/DTA
(877) 708-4382
!
If you are missing any of these components,
call Rainbow Customer Service :
(800) 892-0163
!