Step #1: Layout the Pieces of Your Bracketing Kit
Layout all pieces of your HomeBay Bracket and Hardware kit. You should have 2 wide brackets
for the top of the setup and 2 narrow brackets for the bottom. You will also want to layout all the
hardware provided to confirm all pieces were received. Please note that we have provided one
extra of each of the hardware pieces.
Step #2: Locate Studs and Make Measurements
A stud finder is recommended for this step (not provided). We have provided drywall anchors for
your use, however, for the tightest fitting screen, we recommend using as many stud locations
as possible when installing your brackets. If the stud placement is not sufficient for the width of
the HomeBay, customers have placed spacer boards between studs to bridge the gap - thin 24”
x 24” sheets of plywood will work well for this.
Mark your width at exactly 120” and your height at exactly 92”. mounted. Essentially, you are
marking the corner points of a 120” wide by 92” height rectangle
