Installation
PRODUCT DIMENSIONS
1.
If you already have a tank screen installed, remove it prior to installing the new tank screen.
2. Place the Tank Screen into the inlet hole of the tank, making sure it is approximately centred
in the hole, and that the rim of the tank screen covers the inlet fully.
NOTE:
If installing together with a Solar Shield place that into the inlet hole of the tank first – refer to solar
shield installation instructions.
3. Secure the Tank Screen in place using screws (up to 8 gauge in size) that are suitable for the
tank material.
TANK SCREEN
MAINTENANCE
You should regularly inspect your Tank Screen and remove any leaves or debris. For a more
thorough clean, unscrew your Tank Screen and hose it off before reattaching to your tank.
We recommend covering the hole in your tank while cleaning the screen to prevent mosquitoes
getting in. For even easier maintenance, consider using a Maintenance Tray – a second,
removable screen with handle that sits on top of your tank screen and captures the majority
of leaves and debris for easy removal. Alternatively, you may wish to consider installing a
Maelstrom Filter rather than using a Tank Screen and Maintenance Tray.
•
Tank Screen
•
Screws
•
Screwdriver or drill
WHAT’S IN THE BOX?
WHAT’S IN THE BOX?
TOOLS/MATERIALS YOU MAY REQUIRE
COMPLIANCE
•
AS/NZS 4020:2005 - Testing of products for use in contact with drinking water.
ALL DIMENSIONS IN MM UNLESS OTHERWISE STATED.
ø238 (OD)
ø217
200
54
57
TASS20 200MM
TOP VIEW
SIDE VIEW
ø327 (OD)
287
57
77
ø306
TOP VIEW
SIDE VIEW
TATS11 300MM
TATS02 500MM Round Base
ø505 (OD)
453
59.
5
79.
5
ø492
TOP VIEW
SIDE VIEW
TATS12 400MM
ø414 (OD)
368
55
70
ø388
TOP VIEW
SIDE VIEW
