14
Ro-Trak not functioning? Check for these problems.
1.
Is the PTO engaged?
2.
Is a 12 volt battery properly connected?
3.
Is the sensor at rear of machine plugged in?
4.
Check oil level.
5.
Check for any damaged hoses or wires.
6.
Is sensor lifted 3” or more? (Sensor has transport cut off switch).
7.
Do the indicator lights on solenoid light-up?
8.
If indicator lights light-up and Ro-Trak doesn’t function, push in
silver pins on solenoid spools (approximately ¼” on either side).
9.
If indicator lights do not light up, undo plate on top of solenoid
and check for loose wires.
10.
Steers only one way? Change bad steering switch in sensor.
11.
Call Rain-Flo at (717) 445-3000.
Hyd. Oil Level
Solenoid Valve
Auto Ro-Trak
1. Periodically check oil level. Low oil level may cause air
to come into the system and effect Ro-Trak performance.
2. Change oil and filter every 200 hours or 3 years (ISO 46 Hyd. Oil).
3. Check for any damaged hoses or electric wires.
Maintenance
Valve
Spools
Silver Tip
Indicator
Lights
Valve
Spools
Silver Tip
