Plastic:
Place plastic rolls on top of rollers(A). Pull end of plastic down
in between rollers and underneath bottom roller(B). Secure plastic and drip
tape at end of row. Only feed from one roll at a time.
Plastic
Roll
Plastic
Roll
Plastic
E
nd
V
iEw
5
A
B
STEP 5
See Operating Manuel for adjustments.
i
nstAlling
D
riP
t
APe
AnD
P
lAstiC
A
B
C
Drip Tape:
Remove plate with locking clamp(A).
Slide drip roll onto
rod, press plate(A) tight against roll and tighten tee-handle on clamp. Feed
drip tape through swing arm guide and stationary guide (B) then into down
pipe(C).
Note;
Turn drip emitters up toward plastic for less clogging, and t
o avoid
damaging drip tape with the press pan, adjust down pipe about 1- 2”
below the plastic mulch.
Also make sure drip roll is compressed firmly
between plates for positive braking effect.
