12
Troubleshooting
The following list contains possible problems you may encounter and some solutions.
Most of the problems involving the UNIK Field Transmitter can be classified as trans-
mission/reception malfunctions usually caused by a dead or improperly connected bat-
tery. Other common causes of malfunction could be a dirty optical connector and poor
wire connections.
These problems are easy to fix. If you experience transmission/reception problems, try
using a Control Module that operates properly to determine if it is the Field Transmitter
or Control Module that is the source of the
problem.
Before calling Rain Bird, check this list. If you cannot solve the problem yourself, call
our Technical Service Hotline at 1-800-RAIN-BIRD (U.S.) or 626-963-9311 (outside
the U.S.) and we will be glad to help you.
Problem:
Weak LCD display/no display/incomplete display
Possible cause:
The battery is weak.
Solution:
Replace the battery.
Possible cause:
The microprocessor has locked up.
Solution:
Remove the battery. Short the UNIK Field Transmitter battery clip
(not the battery) contacts together with a paper clip or other piece
of metal for 30 seconds. Reinstall a fresh battery.
Possible cause:
The battery contact is faulty.
Solution:
Tighten the battery connectors to ensure tight battery connection.
Problem:
Locked display or keypad
Possible cause:
The microprocessor did not reset properly.
Solution:
Remove the battery. Short the UNIK Field Transmitter battery clip
(not the battery) contacts together with a paper clip or other piece
of metal for 30 seconds. Reinstall a fresh battery.
Problem:
Station does not start
Possible cause:
No run time has been programmed for that station.
Solution:
Transmit a run time to the Control Module.
Possible cause:
The On-off Mode is activated (X on Sprinkler icon ).
Solution:
Permit irrigation by deactivating the On-off Mode.
Possible cause:
Another station is in operation.
Solution:
Use the manual station option to turn off that station.
Possible cause:
The battery is weak.
Solution:
Replace the battery.