8
STEP 3:
SET THE TIME OF DAY TO WATER
This button determines the time of day when the cycle will start watering. The
timer can be set to water once, twice, or three times per day.
All
stations will
start in sequence at each start time (for example, if this is a four station timer,
and the start times are set at 8:00 AM, 1:00 PM, and 6:00 PM, all four stations
will go on sequentially at 8:00 AM, 1:00 PM, and 6:00 PM).
Start #1 is preset at 8:00. Starts #2 and #3 are blank unless programmed. Start
times can be programmed to start on the hour.
The clock can water either on (A) specific days of the week, or (B) an interval or
cycle of days (i.e. every third day, every fourth day, etc.).
3-A:
WATER
TIMES
PER DAY
Press
Adjust Start Time 1 with:
ON
Display shows:
OFF
OR
First Start Time
Watering will start at 8:00 AM
WATER
TIMES
PER DAY
Press
Adjust Start Time 3 with:
ON
Display shows:
OFF
OR
i.e. 6:00 PM
3-C:
Watering Three Times Per Day
3-D:
To remove a Start Time
WATER
TIMES
PER DAY
Press
Adjust the digits with:
Until the display shows:
ON
OFF
OR
When the two right digits change to “- -” between “23” and “00” hours, the start
time is eliminated.
Note #1:
If “00” shows the timer will start a cycle at midnight.
Note #2:
Start time indicates the the starting time for the entire cycle, all sta-
tions operate sequentially after the programmed start time. The stations do not
have separate start times; e.g., “2 12” does not mean station two starts at noon-
it means station one will run a second time at noon, and when it is done, station
two will run, etc.
Note #3:
Don’t confuse this button with station timing-the displays look alike.
3-B:
Watering Twice Per Day
WATER
TIMES
PER DAY
Press
Adjust Start Time 2 with:
ON
Display shows:
OFF
OR
i.e. 6:00 PM