
English
Page 5
Page 5
Page 5
Page 5
Page 5
ISA Series Sprinkler T
ISA Series Sprinkler T
ISA Series Sprinkler T
ISA Series Sprinkler T
ISA Series Sprinkler Timer
imer
imer
imer
imer
Mount Timer
Screw two #10 screws into the wall 4¾''
(120 mm) apart. Leave
1 8
'' to ¼'' (3,2 to 6,4 mm)
of each screw head protruding from the wall.
(Use plastic mounting anchors for plaster or
masonry).
Place the two keyhole-shaped slots on the back
of the timer over the screw heads. Then slide the
timer securely down onto the screws.
OPTIONAL:
To further secure the timer, remove
the timer’s lower access cover by gently pulling
the cover off using the slots on the left and right
sides of the timer. Then drive a third screw
through the lower middle hole.
Install Battery
During a power outage, the battery preserves your
programmed watering schedules. A newly installed
battery will hold information for up to six hours if
power goes out.
NOTES
::::: The battery serves as memory
back-up only. You can program the timer
on battery power, but the system will not
water without AC power.
Replace the battery once a year. If power
outages occur frequently, you may need
to change the battery more often.