
5. Routine Operations
Rain Bird
®
ET Manager Series - Installation and Operation Manual
40
Set Signal Provider Code
If the attention message, “Set Signal Provider Code”
appears on the Home screen, your ET Manager has been
installed, but not programmed with the appropriate
Signal Provider Code.
Action to Take:
Navigate the menus to Signal Provider
Code and program the appropriate Signal Provider Code.
Main Menu
Settings
System
Data Source
Signal Provider Code
Use the
Œ
,
Õ
and
À
buttons to set the codes for A
through J.
Note:
To obtain your Signal Provider Code, contact your
Rain Bird Distributor, your installation contractor, or go
to www.rainbird.com/etmanager. Refer to chapter 3,
Programming, for more information regarding the Signal
Provider Code.
Window Overlaps Off Day
If the attention message “Window overlaps off day”
appears on the Home screen, the Water Window pro-
grammed in your ET Manager is overlapping a restricted
watering day. When restricting available watering days,
the Water Window must begin and end either before
midnight, or after midnight. If your Water Window is
programmed to run through midnight, you must set
available days to all in the ET Manager. You can still pro-
gram off days by turning days off on your sprinkler con-
troller. A sensor built into your ET Manager will recog-
nize off days scheduled into your sprinkler controller.
The Look-Ahead Feature will not function.
Action to take:
Navigate the menus to Water Window
and change the Water Window to begin and end either
before or after midnight.
Main Menu
Settings
Irrigation Control
Water Window
Note:
If this situation occurs, and your Water Window is
“open” and the sprinkler system is watering on an “on”
day and the next day is an “off” day, watering will cease
at midnight.