Oslostrasse 5, CH
–
4023 Basel
Tel. +41 [0]61 333 70 33, Fax +41 [0]61 333 70 32
www.easyrain.net [email protected]
Brunner Bewässerung - Arrosage
Gebrauchsanweisung Steuerung ESP-TM
2
ESP-TM Installation and Operation
Page 1
INTRODUCTION
Congratulations on purchasing a Rain Bird ESP-TM
solid state controller. This manual describes how to
install, operate, and maintain your controller. Please
read these instructions carefully.
Quick Reference Guide
If you want to:
For your convenience, we have included a Quick
Reference Guide below, so you can quickly find
instructions for common tasks.
Change the time of day
Turn the controller off and on
(for example, because of rain)
Adjust watering times for all stations (for
example, during a hot or cool period)
Start the sprinkler system manually
Install a new battery
Replace the fuse
Troubleshoot a controller problem
page 11
page 19
page 21
page 23
page 25
page 25
page 36
The controller has several stations as shown in the
illustration on the following page. Each station is
connected to a remote control sprinkler valve.
The valve opens when it receives a signal from the
controller, and the sprinklers connected to the valve
turn on. When these sprinklers have run for their
allotted time, the controller shuts off the valve and
opens the next valve in sequence.
For example, the illustration shows that station 1 is
currently watering.
When station 1 is finished, the controller will shut it
off and start station 2.
In the same way, station 3 will begin watering when
station 2 is finished.
ESP-TM Installation and Operation
Page 2
Controller Stations
All manuals and user guides at all-guides.com