15
PGM
A
To set a
custom cycle:
1.
Rotate the dial to CUSTOM. The display
shows the program and CUSTOM. The dis-
play shows USED if the program is active
and using a different cycle mode. If so, you
can override the previous setting.
2.
If the program you want is not displayed,
press PGM until it is.
3.
Press ON. The display shows CUSTOM and
the custom light on the faceplate illuminates.
4.
Rotate the dial to the first day of the week
and use the ON and OFF keys to turn the
day on or off. The display shows the day and
the ON/OFF setting.
5.
Repeat step 4 for all the days of the week
you want to change.
6.
Return the dial to AUTO. The controller re-
turns to the time of day display and waters
on the days you have specified.
PGM
A
DAY
To set a
cyclical cycle:
1.
Rotate the dial to CYCLICAL. The display
shows the number of days remaining and the
number of days in the cycle. The number of
days in the cycle is flashing, indicating that it
is ready to be set. The display shows USED
if the program is active and using a different
cycle mode. If this is the case, you can over-
ride the previous setting.
2.
If the program you want is not displayed,
press PGM until it is.
3.
Press ON. The cyclical display shows and
the cyclical light on the faceplate illuminates.
4.
Use the arrow keys to set the number of
days in the cycle. For example, if you set a
3-day cycle, the controller skips two days
and waters on the third day.
5.
Press MAN START/ADV to toggle to the left
side of the display. The number of days re-
maining in the cycle flashes, indicating that it
is ready to be set.
6.
Use the arrow keys to set the number of
days remaining before the next watering day.
This tells the controller where today is in the
cycle you have just set.
PGM
A
DAYS REMAINING
DAY CYCLE