Rain Bird ESP-LX, Инструкция по установке, программированию и эксплуатации, Страница: 38 / 88

36
ESP-LX Modular Controller
The Valve Settings menu appears.
Press “2” on the Valve Settings menu.
The display shows a valve number and its current settings for
Cycle+Soak™. The valve number flashes.
NOTE: Cycle+Soak™ settings of “:00” indicate
normal operation. The valve will operate for its
programmed run time with no delays for soak time.
To select a different valve, press “+” or “–” until the valve
number you want appears.
Press “Next.”
The Cycle numbers flash. Press “+” or “–” to set the maximum
number of minutes (up to 60) for a watering cycle.
Press “Next.”
The Soak numbers flash. Press “+” or “–” to set the minimum
number of minutes (up to 60) for soaking between cycles.
To set Cycle+Soak™ for another valve, press “Next.” Then
repeat steps 4 through 10.