ESP-ME3 Controller
12
EN
Run a Single Program
Start watering immediately for one program.
Turn the dial to
AUTO
.
a
Press
Program Select
to choose the desired
Program (if necessary).
b
Press the
Hold to Start
button to begin
watering the selected Program.
c
Irrigation will begin and
STARTED
will appear on
the display.
d
Press the
Advance Station
button to advance
to the next station if desired.
e
NOTE:
A maximum of 88 stations can be queued
across all four programs.
During Manual Watering (Single-station or Single-program):
The display shows a blinking sprinkler symbol, the
active Station Number, and the remaining Run Time.
• To cancel manual watering, turn the dial to
OFF
for
three seconds until the screen shows OFF.
To add additional programs to the manual watering queue:
Turn the dial to
Manual Watering
a
Press and hold
Program Select
to show program
letter on the display.
b
Press
Program Select
to choose the desired
program (if necessary).
c
Press the
Hold to Start
button to begin watering
the selected program.
d
Turn the dial to
AUTO
Advanced Programming
Odd or Even Calendar Days
Set watering to occur on all ODD or EVEN calendar days.
Turn the dial to
Water Days
a
Press
Program Select
to choose the desired
Program (if necessary).
b
Press and hold and until
ODD
or
EVEN
is
displayed.
Cyclic Days
Set watering to occur at specific intervals, such as
every 2 days, or every 3 days, etc.
Turn the dial to
Water Days
a
Press
Program Select
to choose the desired
Program (if necessary).
b
On the
Custom Days of the Week
screen, press
until the
Cyclic
screen is displayed (after SUN).
c
Press or to set the desired
DAY CYCLE
, then
press .
d
Press or to set the
DAYS REMAINING
before
the cycle begins. The
NEXT
watering day updates
on the display to indicate the day that watering
will start as shown.
B
NOTE:
See
Special Features
to set Rain Sensor
ON by Station.