5
Trolley Operating Instructions
Lamp Replacement
The trolley uses two LEDs for directional headlights and two
incandescent bulbs for interior lights. To replace the headlights or
interior lights remove the four screws that attach the body to the frame,
shown in figure
2.
Lift the body from the frame and replace the bulbs
.
Note: Although the body shell can be rotated 180 degrees and still
be fitted to the frame, the directional lights will only work properly in
the original orientation. Before removing the body shell, mark an
indication on which ends of the trolley frame and body shell match,
so that the shell can be replaced properly.
Interior Lights
LED Light
LED Light
Figure 3: The location and the removal of the bulbs in the trolley.
Operating Overhead Trolley Pole
The Trolley is equipped with a set of third rail pickup rollers for
supplying voltage to the motor and lights. The trolley pole as delivered
is not an operating trolley pole. However, it is possible to reroute the
wire from the pickup rollers to the trolley pole inside the body shell so
you can obtain power prototypically from an overhead catenary wire.
Please contact: M.T.H. Service (phone: 410-381-2580;
fax:410-423-0009; e-mail: [email protected]; mail: 7020
Columbia Gateway Drive, Columbia, MD 21046-1532) for instructions
on making this adjustment.
