15
Rugged Rails 2-8-0 Steam Engine
Headlight Replacement Instructions
The locomotive’s lights are controlled by a constant voltage circuit in the engine.
They are easy to remove and replace when they burn out. See the diagrams and
directions below for instructions on accessing and replacing the light bulbs in
this locomotive.
You can obtain replacement bulbs directly from the M.T.H. Parts Department
(order online: www.mth-railking.com, e-mail: [email protected]; mail:
7020 Columbia Gateway Drive, Columbia MD 21046-1532, FAX: 410-381-
6122).
1. To replace the headlight in this model you will need to follow the disassembly
instructions for greasing the engine in figure 6 on pg. 13. Once the boiler has been
removed you can access the headlight (see figure 8).
2. Unscrew the bulb.
3. Screw a new bulb into the socket, and reassemble boiler shell to chassis, being
careful not to pinch any wires.
Figure 7
