background image

5

RailKing RS-3 Diesel Engine

Speed Control:  

M.T.H. engines equipped with Loco-Sound have speed control capabilities
that allow the engine to maintain a constant speed up and down grades and
around curves, much like an automobile cruise control.  You can add or drop
cars on the run, and the engine will maintain the speed you set. 

While the engine is programmed to start with the speed control feature
activated, you can opt to turn it off.  This means the engine’s speed will fall as
it labors up a hill and increase as it travels downward.  It is also affected by the 
addition or releasing of cars while on the run. The engine will run more slowly 
at a given throttle voltage when speed control is on than when it is off.

To turn speed control on and off,

 put the engine in neutral, then press the

transformer’s Whistle button firmly but quickly one time then immediately
press the Bell button two times.  Repeat the 1 whistle, 2 bells code to return it
to the other condition.  You will want to do this during the initial neutral upon
start-up if you ever couple this engine to another engine that is not equipped
with speed control to avoid damaging the motors in either engine.  Each time
you shut down the engine completely, it will automatically turn speed control
on.

Direction Lock:

You can lock your engine into a direction (forward, neutral, or reverse) so that
it will not change directions.  To do this, put the engine into the direction you
want or into neutral, to lock it into neutral, run it at a very slow crawl (as
slowly as it will move without halting), and quickly but firmly press your
remote’s Horn button once followed immediately by three presses of the Bell
button. Two horn blasts will indicate that the engine has made the change.
The engine will not change direction (including going into neutral) until you
repeat the 1 horn, 3 bells code to return the engine to its normal condition,
even if the engine is kept without power for extended periods of time.

Feature to Be Activated:

Speed Control On/Off
Lock into a Direction/Unlock

Button Code:

1 Whistle, 2 Bells
1 Whistle, 3 Bells

Содержание RS-3 DIESEL ENGINE

















Отзывы: