20
R-17 Subway Set with Proto-Sound® 2.0
Quick-Start DVD
The included DVD Quick-Start video demonstrates the start-up and basic operation of
this set as well as other information about model railroading. You may find it helpful to
view the DVD before operating this set.
RailWare Interactive CD ROM
M.T.H. provides a free RailWare CD ROM in each Ready-To-Run set. It is full of helpful
information on M.T.H. product history, track planning software, a dealer finder, and
information and video clips on Loco-Sound and Proto-Sound 2.0. Follow the directions
below to use the CD ROM.
Minimum System Requirements: Pentium 100, 16MB RAM, Windows 95 or later, CD
ROM drive, Sound Card, display properties set to greater than 256 colors. The CD will
®
not work on a Mac OS unless you run VirtualPC .
Running RR-Track Software
You may run the RR-Track software directly off of the CD ROM or you may install the
software to your hard drive.
1.
On the Desktop, click on the icon that says My Computer.
2.
Find your CD ROM drive.
3.
With the M.T.H. CD ROM in the drive, double click on the icon for the CD ROM
drive.
4.
Find the folder on the CD ROM entitled INSTALLATION.
5.
Choose the folder inside entitled RRTRAXSETUP.
6.
Run the file in that folder called SETUP.EXE and follow the directions it provides.
The program may ask you for a registration code. If it does type in "M.T.H." and it will
run.
Additional track libraries can be obtained directly from RR-Track. See their website for
more information www.rrtrack.com.
Installing Adobe Acrobat Software
To read some of the electronic documents included on the CD ROM, you will need to
®
install the Adobe Acrobat Reader if it is not already on your computer. To install the
software:
1.
On the Desktop, click on the icon that says My Computer.
2.
Find your CD ROM drive.
3.
With the MTH CD ROM in the drive, double click on the icon for the CD ROM
drive.
4.
Find the folder on the CD ROM entitled INSTALLATION.
5.
Choose the folder inside entitled ACROBAT READER.
*If you are running Windows 95, 98 or NT choose the folder 32 BIT. Run the file
AR32E301.EXE and follow the directions it provides.
If you have problems you cannot resolve by using these directions, contact
[email protected] or call 410-381-2580 for further help.
