Rail King NORTHERN STEAM ENGINE, Руководство по эксплуатации

Страница: 24 / 37

24
RailKing Northern Operating Manual
RAILKING
Using RESET To Program ProtoSounds® on page 18). Once in Feature
40, press the transformer whistle button and wait for ProtoSounds® to
sound a bell ding. Continue pressing the whistle button until ProtoSounds®
sounds two bell dings signifying that the Remote Lockout Control has been
selected. To lock in the setting, simply turn the throttle all the way off and
then back on again.
To turn the Remote Lockout Control setting back off,
go back to Feature 40 and press the whistle button until only one bell ding
sounds. To lock in the setting, simply turn the transformer throttle off and
then back on again. Alternatively, you can go to RESET Feature 18 to reset
all ProtoSound® features back to their original factory defaults including
Remote Lockout Control.
RESETTING ALL PROTOSOUND OPTIONS TO
FACTORY DEFAULTS
ProtoSounds® is equipped with a RESET feature (Feature 18) that resets
all programmable options back to their original factory settings. This is a
useful feature if you find your engine not operating the way you think it
should and don’t want to take the
time to check each RESET
feature one at a time. To reset all
the RESET features back to their
original factory settings, enter
RESET and go to Feature 18.
(See the section entitled Using
RESET To Program
ProtoSounds® on page 18).
Once in Feature 18, press the
transformer whistle button and wait for ProtoSounds® to sound a garbled
bell sound, then interrupt the throttle to lock-in the setting.
Clank,
Clank,
Etc.
In RESET Mode
Move The Throttle
Up & Down From
High Voltage To Low
18 Times
Listen For 3 Clank
And 3 Clink Sounds
Push The Whistle Button
Until You Hear
A Warbled Bell Ding
Interrupt The Throttle
To “Lock-In”
The RESET Setting
H