4
RailKing F-3 Diesel Engine
Connecting the Transformer
The Z-750 power supply included with this set provides an easy-to-use, safe
power source for AC-powered trains and accessories.
Plug the wire from the transformer into the remote lock-on’s center port,
marked “Power,” then plug the transformer into the wall outlet. Insert two
AA batteries (not included) into the remote handheld as shown.
Lubricating the Engine
You must lubricate the engine before
operating it. Use a light household oil and
follow the lubrication points marked “L” in
Fig. 6 on pg. 10. Do not over oil. Use only
a drop or two on each pivot point.
Coupling the Engine and Cars
Our couplers are designed for realistic
operation. Place the engine and cars on the
track and couple them together. If the
coupler is already closed, press down on
the small finger that extends from under
the right side of the coupler to open the
coupler knuckle and allow the couplers to
interlock as shown in Figure 2.
Push Down on Coupler Finger to
Release Knuckle
Figure 2. Coupling the Passenger
Cars Together
