13
0-4-0 Steam Engine Instructions
To remove the 0-4-0 locomotive boiler from its chassis, follow the body
removal instructions (see figure 15). Once the body has been removed,
rotate the headlight bulb counter-clockwise as seen in Figure 16 to
remove.
To remove the caboose car body from its chassis, turn the car over and
locate and remove the four mounting screws (one in each corner of the
car as seen in Figure 17) attaching the body to the chassis. Once the
screws are removed, gently lift the car body up and away from the
chassis.
After removing the body from the chassis, turn the chassis over and
locate the car interior lamp housing mounted on the inside of the
chassis. Remove the burned out bulb by pushing the bulb downward
and rotating it counter-clockwise as seen in Figure 18. Once the bulb
has been removed, install the replacement bulb by pushing down and
turning the bulb clockwise to lock into place.
Figure 17: Removing the caboose body from its chassis..
Figure 18: Locating and removing the
interior bulb.
