5
RailKing Genesis Train Set Operating Manual
RAILKING
complete the track design. You can purchase additional track
components from any authorized MTH reseller.
The lighted lockon included in
your set snaps into any RiteTrax®
track section roadbed and
functions as the interface
between the track and the
transformer. Each RiteTrax® track
section includes a “knock-out” in
the roadbed that must be removed
to reveal the opening for the
lighted lockon. To remove this
knock-out
grab the
knock-out
with a
pair of pliers and gently twist the
knock-out
until it snaps away from
the roadbed base. Once the
knock-
out
has been removed, snap the
lighted lockon into the roadbed
taking care to make sure that the
lockon arms snap into the roadbed
electrical receptors. To complete
the connection between the
RiteTrax® track section and the
transformer, simply plug in the
color-coded wire harness that was
included in your set.
Knock-out
Must Be Removed
Before Lighted Lockon
Can Be Inserted
Figure 3: Top view position of lighted lockon
preparing to enter RiteTrax® section.
Figure 5: Underside view of RiteTrax® track
section with lighted lockon in fully seated position.
Remove
Knock-out
By Holding
& Twisting
With A Pair
Of Pliers
Figure 4: Underside view of RiteTrax® section
with knock-out removed and lighted lockon in
position for insertion.
Figure 6: Top view of RiteTrax® section with
lighted lockon in fully seated position.
