Rail King 2-8-0 STEAM ENGINE Скачать руководство пользователя | Manualshive

Страница: 19 / 24

background image

19

RailKing 2-8-0 Steam Engine

Additional Features Accessible with the DCS Remote
Control System:

While conventional mode operation of a Proto-Sound 2.0 engine yields
wonderfully realistic sound and several train control features, command mode
operation allows the user to access a world of command functions never before
accessible to O Gauge railroaders. With the addition of the DCS Remote
Control System (including a DCS remote handheld and Track Interface Unit)
users gain many advanced features, including:

• DCS Proto-Speed Control-Establishes desired locomotive speed in scale
miles per hour increments via a thumbwheel control and allows operator to set
maximum speed and acceleration/deceleration rates.

• Locomotive Lighting Control-Independently controls locomotive headlights,
marker and interior lights, and ditch lights.

• Emergency Stop-Single button push stops your trains (but does not turn off
track power).

• One Touch Global Mute/UnMute-Single button mutes or unmutes all
DCS-controlled locomotives’ user-defined actions, including sound, lights, and
smoke.

• Proto-Dispatch Operation-Public Address-like feature allows users to speak
through locomotive speaker during operation.

• Proto-Cast-Allows users to play audio recordings through locomotive speaker
during operation.

• Proto-Doppler Sound Effects Set Up-Users can configure locomotive for
Doppler Operation, including setting distance points for Doppler start, repeat,
and stop modes.

• Independent Volume Control of Engine Sounds, Bell, Horn & Whistle for
each Locomotive .

• Control up to 50 different DCS-equipped locomotives at one time with
multiple TIUs.

«
...
17
18
19
20
21
...
»

Содержание 2-8-0 STEAM ENGINE

























Отзывы:

Нет отзывов

Похожие инструкции для 2-8-0 STEAM ENGINE

SM-79 Sparviero Exterior

Бренд: Eduard Страницы: 4

Бренд: Trix Страницы: 8

Midwest FreightReady-to-Run Set

Бренд: Lionel Страницы: 16

Smart Bluetooth Robot Car

Бренд: Uctronics Страницы: 42

Toot-Toot Drivers CustomisablePeople Carrier

Бренд: VTech Страницы: 11

Бренд: E-FLITE Страницы: 40

K FORCE BARRACUDA ROTOSHOT BLASTER

Бренд: K'Nex Страницы: 16

Бренд: H-KING Страницы: 12

Spring Rocking Horse

Бренд: QABA Страницы: 3

F-4 Phantom-II FF-D007

Бренд: Fly Fly Hobby Страницы: 10

MH-60K interior S.A.

Бренд: Eduard Страницы: 4

Lincoln Logs Big L Ranch

Бренд: K'Nex Страницы: 8

Zoom Ju 87A interior S.A.

Бренд: Eduard Страницы: 4

Бренд: TWM Страницы: 16

Jimmy Neutron boy genius ultra orb

Бренд: Radio Shack Страницы: 8

CHEF CAKE POPS FACTORY

Бренд: Smoby Страницы: 8

OMAHAWK 45-60 ARF SEMI SCALE

Бренд: Piper Страницы: 24

125 Upright Bike

Бренд: Radica Games Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды