Manual IB-PCI1901-C32
•
Carefully plug a SATA power cable (from PC’s power supply) to the add-on card’s SATA power port.
Pay attention to the correct alignment of the SATA plug.
•
Place the cover back to the computer.
•
Insert the power plug into the plug socket and start your computer
•
Connect a supported USB 3.2 (Gen 2x2) enclosure, like the IB-1916M-C32 via USB Type-C
™
cable to the
USB Type-C
™
port of the IB-PCI1901-C32.
•
When the external enclosure has been plugged correctly the corresponding LED at the back panel of the
PCI card will turn on blue!
Note!
The full USB 3.2 (Gen 2x2) transfer rate can only be achieved with a compatible USB 3.2 (Gen 2x2) external
enclosure. Furthermore, the USB 3.2 drivers must be installed by the operating system. If this is not the case, install
the appropriate drivers for your operating system (Windows
®
).
